Product Description
Product Description
Good quality stepper motor with gearbox valve Best-Selling
Manufacturers of Permanent magnet(PM) Stepper Motor & PM Synchronous Motor:
1. PM Stepper Motor:
| Diameter |
8mm |
10mm |
15mm |
20mm |
25mm |
35mm |
42mm |
55mm |
| Model No. |
PM8S-020 |
PM10S-020 |
PM15S-020 |
PM20S(L)-020 |
PM25S(L)-048(024) |
PM35S(L)-048(024) |
PM42S(L)-048 |
PM55L-048 |
2. PM Stepper Motor with gearbox(with different gear ratio):
| Diameter |
10mm |
15mm |
20mm |
24mm |
25mm |
28mm |
35mm |
42mm |
| Model No. |
PG10S-020 |
PG15S-020 |
20BYJ46 |
24BYJ48 |
PG25S-048 |
28BYJ48 |
35BYJ46; PG35L-048 |
PG42L-048 |
3. PM Linear stepper motor(with lead screw):
| Diameter |
8mm |
10mm |
25mm |
| Model No. |
PL8S-020 |
PL10S-020 |
PL25S-048(024) |
Application :
HVAC/R Valve Actuation
Office Automation Printers, Copiers, Data storage
Medical Applications Pill dispensing Analysers
Telecommunication Antennae positioning Switching lines
Other Industries & Applications Robotics
Highlights :
Excellent open loop control - No encoders necessary
Digitally controlled - Easy to use with a micro processor
Cost effective - compact design, lower integration cost
Maintenance free - motor is brushless
Winding possibilities - Bipolar
General Specification:
| Item |
Specification |
| Step Angle Accuracy |
±8%(full step, no load) |
| Resistance Tolerance |
±10% |
| Inductance Tolerance |
±20% |
| Temperature Rise |
80.C Max.(rated current,2 phase on) |
| Ambient Temperature |
-20.C~+50.C |
| Insulation Resistance |
100MΩMin. ,500VDC |
| Dielectric Strength |
600VAC , 1s , 3mA |
Specification:
| Model |
Step Angle
(Deg.) |
No. of
Phase |
Rated Voltage
(VDC) |
Current/Phase(A) |
Resistance
/Phase(Ω) |
Holding Torque (Kgf.cm) |
Detent Torque (gf.cm) |
Pull-in Torque (gf.cm) |
Wire
Diagram |
| PG35L-048-01/8.4 |
7.5/8.4 |
4 |
12 |
0.4 |
30 |
1.2 |
500 |
700(at 100pps) |
B |
| PG35L-048-01/19 |
7.5/19 |
4 |
12 |
0.4 |
30 |
10.0 |
2600 |
3500(at 100pps) |
B |
| PG35L-048-01/19 |
7.5/19 |
4 |
24 |
0.218 |
110 |
12.0 |
2280 |
5000(at 100pps) |
B |
| PG35L-048-01/30 |
7.5/30 |
4 |
12 |
0.4 |
30 |
3.0 |
1500 |
1500(at 100pps) |
B |
| PG35L-048-01/60 |
7.5/60 |
4 |
12 |
0.4 |
30 |
8.0 |
3000 |
4500(at 100pps) |
B |
| PG35L-048-01/120 |
7.5/120 |
4 |
12 |
0.4 |
30 |
10.0 |
6000 |
5000(at 100pps) |
B |
All parameter and dimensions could be customized according to your actual application. If you need any more information, please do not hesitate to contact me.
Dimension
Customization On Call
Coil Modifications - Resistance and Inductance.
Magnets - to yield higher linear force or reduced detent levels.
Higher Strength Plastics for higher impact forces.
Reduced or increased Detent Force to suit the application.
Screw - metric or imperial tips, length.
Special Flanges, Connectors, End of motion detection sensors.
Wire Harness - connectors, pins, lead length, shrink tubing.
Examples of our customers:
